The basics of painting wicker furniture

Written by Wicker Paradise

One of the advantages when you buy wicker furniture is that you can paint it whenever you remodel or want a change. Wicker takes color well and if painted regularly will last you longer. Here is a step-by-step guide to the basics of painting wicker furniture:

 wickerparadise5

Firstly remove any and all flaking paint. You can do this with a wire brush. Scrape off as much as you can. In some cases you can even use a home high-pressure car washer to blast the paint off, though this only applies to rattan reed furniture.

Once the flaking paint has come off, you need to apply a primer. For both indoor and outdoor wicker furniture apply two coats of an oil based wood primer. You can either spray it on or use a good natural bristle brush.

Once the primer has dried you can apply the paint. For the best finish use a compressor and apply two coats of semi gloss house paint. This paint adheres to wicker well and is durable. Latex paint is also an option, though it does not last as long and is prone to flaking.

Remember to take general safety precautions when painting. Wear safety goggles and a facemask when applying both the primer and the paint. Paint in a well-ventilated area and not in a small-enclosed space. While the compressor is the recommended way to apply paint, if you only have one piece to paint, then using a spray is a good alternative. Generally spray cans are not recommended when painting multiple pieces is due to the wasted paint from the over-spray and it can be costlier.

Wicker paradise sells beautiful outdoor wicker furniture that will be perfect for your patio or deck.

Cost Benefit Analysis: Construction Consultants Versus Flying Solo

If you’re managing an arena construction project, and the owner demands a new staircase and entryway added to the plans as construction is underway that can cause major delays. Those delays carry big dollar signs and serious risk with them. A solo project manager may not be adequately equipped to deal with every potential problem that delay could cause. Construction consulting is always an option, but concerns on cost might lead some project managers astray. Don’t let yourself get into this situation.

Before you consider going solo, run this quick analysis to find out if you know everything you need to know to navigate a crisis like this.

Permits

Inspection is a must during a situation like this. Will you have time to get city inspectors out to the job site, and can you work around their needs? Those aren’t easy tasks when you try to make safety the number one priority. If you decide to skip the inspection, you’re breaking the law. That can carry significant consequences if you’re working on a project like an arena.

Personnel

Does your project manager have room in his schedule for the overtime needed to complete the change. If not, you’ll need to hire a secondary crew to come in and work that job. They’ll have foremen on the ground, but no one to manage their efforts. Construction consulting services handle some of that work on the ground, so you can focus your efforts on navigating the immediate scenario.

Delays

Consultants are better equipped to handle delays, and can be of great benefit even when things are running smoothly. Consultants achieve their status because they are growth hackers. They understand how to maximize down time and improve production.

Accountability

Another benefit to consultants is accountability, which is really a benefit to manager and building owner. Both sides are protected when every transaction is properly documented. This is one of those services you don’t know you need until you’re facing litigation. That’s when you’ll be glad that your consultant took the time to file all paperwork and verify materials shipped. If your consultant is an expert in materials, like structural steel, they may even help cut costs on ordering from different suppliers.

Final Verdict

If you have all of these situations handled, then a consultant isn’t necessary. It’s just not likely that a crew is prepared for every potential problem that may crop up. If delays are making your project challenging, a consultant can help you.
———————————————————————————-
Lyle Charles Consulting offers construction advisory services and consulting on commercial construction projects. Lyle Charles is an experienced structural steel expert and a certified expert witness.

Revamping your Poolside Area

Written by Wicker Paradise

With the summer time just around the corner, it might be the time to give your poolside area a facelift. The coming of the warmer days would bring in more opportunity to spend time outdoors along with the perfect temperature for a swim. The tips below might be useful in achieving an outdoor area makeover.

Plants

It might seem simple to plant flowers and trees around an area but the truth is that a certain harmony and color combination would need to be respected. Choosing just about any plant will not do. For instance, to create a tropical look around the poolside, plants such as palms and bird of paradise can be used. For a more modern and sharp look, cacti of different shapes and height can be planted.

Furniture

All weather wicker patio furniture made out of resins are great for the outdoors. They also convey a modern and elegant look to the poolside area. These types of furniture have the benefit of being very resistant to the element and other factors such as the pool water. These type of furniture thrive in humid environments.

Cushions

You could simply offer a facelift to your poolside just by going for a change in cushions. Outdoor furniture cushions are better chosen in durable and fast-drying materials as they would be in a highly humid place. Vibrant colors such as turquoise or yellow are great for the poolside. However, colors such as white will yield a timeless elegance.

Wicker Paradise specializes in wicker and resin patio furniture that are resistant to humidity and sunlight.

Four Items Every Poolside Patio Requires

doors2

Having a pool can be a huge selling point for your home in the future, as well as a gathering place for your family in the present. A nicely kept pool area is attractive and inviting. It’s also safer, without a lot of clutter to trip people up. Some states even make it illegal to keep a cluttered pool area or maintain a backyard without fences.

Furniture

Every patio needs good furniture to make the ambiance complete. Lounges made of wicker tend to stand up well to all four seasons, and they resist sun fading too. Grab some extra cushions for padding to lounge about all day. It’s a good idea to have an umbrella, with stand, if you don’t have natural trees or brush providing shade and coverage.

Storage

With all of your extra cushions and accessories, you’ll want some decent storage to keep everything neat. A large plastic crate will usually do the trick, and they styled to look modern as well. These crates snap shut, and they are large enough to store everything from pool supplies to cushions and toys.

Fencing

Fencing is a good safety precaution to take, especially if you have small children in the home. Fencing protects these children from accidental drowning by falling into the pool. Plus, you can easily separate your backyard grass area from the pool.

Doors

A new sliding glass door can let the light into your living room while providing access to the backyard. A wider doorway is an excellent upgrade for home owners who like to barbecue, especially if you shuttle plates of food in and outside frequently.

Bio: ETO Doors is a custom door manufacturer with showrooms in Los Angeles and New York. ETO Doors offers its entire selection online, and you can read ETO Doors reviews from real customers.

Make Sure You Have the Right Tools for Your Pool

Article Written By : Viv Artificial Grass

If you’re thinking about installing a pool, you have a lot to look forward to. There will be great times with that pool and definitely one of the best ways to cool off. However, you probably also know there will be some work involved too. You’re going to need to maintain it in a number of ways, for one thing. It will also mean making sure people stay safe around it.

You probably know this though. That’s to be expected. What most people don’t know is that having the right power tools handy is important too. Perhaps you already have the right Powerbuilt or Kawasaki tools for the job. Powerbuilt tools make some that are especially handy for pools.

In any case, so long as you have DIY credentials, make sure you have some tools ready for jobs that involve your pool. Whether it’s handling minor issues or fixing potential emergencies, you can’t be too careful when an investment as big as a pool is on the line. The right tools will make all the difference.

Swimming pools as your next home improvement project

Article written by : Your Home Improvement Place

If you have a swimming pool in your back yard, why not try to make the most of it for you and your whole family to enjoy? If you have spare time, tend to your swimming pool. Aside from the know how, you’re also going to need a few tools in your tool shed for you to be able to pull off such an ambitious project. Snap-on air compressorand a snap-on pressure washer and a host of other swimming pool tools for cleaning, maintenance and improvement are necessary and indispensable if you want to have a really good result of your project. Depending on the size of your pool, you might need a couple of extra hands to help you out with cleaning pool filters, changing out your water, or adding chlorine to your pool to make sure that your pool water would be usable for quite a while. Pool maintenance can be expensive, so if you can do it yourself and do a good job at it as well, then do it. This way you can save hundreds of dollars, and you’ll end up being more knowledgeable too with swimming pools and pool maintenance. If you are ever going to need the services of contractors, you wouldn’t be tricked into spending more than you actually have to anymore. Other than that, the sheer fulfillment and joy that you can get from personally doing a job well done will definitely make you one proud swimming pool owner.

Selecting the Right Cleaning Agent for Your Artificial Grass

This article was written by Artificial Turf Supply Commercial & Residential Division.

After investing time and money on an artificial grass installation, you want to make sure that your lawn lasts for years. And it will as long as you perform some basic maintenance and care for your turf properly. This can include using cleaners to remove stains, gum or pet waste materials from your artificial turf lawn. However, using the wrong cleaner can damage your lawn and potentially void your warranty.

Here are some things to keep in mind when selecting a cleaning agent for your artificial turf lawn:

Never use harsh chemicals on your artificial turf lawn. Harsh acid or alcohol-based cleaning agents aren’t recommended for use with artificial grass. They can simply be too powerful and cause permanent damage to your lawn. Specifically, they can cause the blades of grass to become weak, leading them to break and not stand up correctly.

Rinse thoroughly after any cleaning. Even after using a mild cleaning agent such as laundry detergent, it’s still important to rinse your lawn completely with water. You’ll want to rinse it enough so that the detergent passes through the infill and goes all the way down into the ground.

Don’t use rough brushes or cloths when cleaning your lawn. A rough material can fray the blades of grass over time. Instead, choose a soft brush or cloth and gently clean the lawn to remove stains or perform basic cleaning.

A good rule of thumb is to consult the installation manual provided when you purchased your artificial turf. This will give you information about what the manufacturer recommends for cleaning your lawn.


Artificial Turf Supply Commercial & Residential Division can help you find the perfect artificial grass for your business or residential property. Visit their website to browse through their large selection of synthetic grass and to read advice on installing and caring for your turf lawn.

Swimming Pool Noise Control Solutions

Written by : Home and Gardens

Indoor pool construction should consider acoustic cancelling solutions to control noise from dives and from people inside. Apart from that, materials and the architecture should be designed to reduce reverberation or echo. Solution to these acoustic problems includes the following;

Baffles and banners

When you can’t alter existing building structures and make them soundproof internally within the walls, the easiest way to solve noise and echo is to install fabric or acoustic baffles and clouds on the ceiling. These are used mostly on open lobbies, malls, and parking spaces and indoor gyms. Economical and artistic, it also improves speech intelligibility and reduces sound levels on high noise decibel areas.

Acoustic Foams

Acoustic foam panels are used as sound barrier in commercial and residential structures. Carlo Badalamenti of The Foam Factory recommends neoprene sheets as sound deadening foam solutions in between walls, ceilings and even on floors. It’s commonly used in multi-layered construction schemes and can be designed to various shapes and thickness. Acoustic foam manufacturer like Canada Foam by Mail can deliver custom sizes for any architectural requirements.

Wall Panels

Acoustic wall panels are flexible materials that you can install on existing room walls. These can come in planks or sheets and can be applied on curved walls in an auditorium, gym or indoor swimming pool walls to reduce sound reverberation. Effective and versatile solution, most interior architects use this on existing structures that needs to be remodeled. For residential structures, home owners who want to sound proof rooms can make use of wall panels to absorb and control outside noise.

For sound proofing solutions, you can check out Canada Foam by Mail products for both residential and commercial needs. They can supply acoustic foams in different shapes, thickness and bass absorbent grades.

Artificial Grass Maintenance Tips for Fall

Written by Artificial Turf Supply Commercial & Residential Division

Fall is nearly here, which means it’s time for cooler temperatures and possibly some rain. Fortunately, if you have fake grass, there’s not much you have to do to prepare for the coming season. Fake grass has been created to withstand outdoor elements, including rain, wind, and cold temperatures. Still, there are a few things to consider when taking care of your fake grass in the fall. Artificial Turf Supply Commercial & Residential Division offers the following tips on how to maintain fake grass during the fall season.

Eliminate Leaves and Debris

The fall season is when leaves do more than change color; they eventually drop off and get blown by the wind into your lawn. If you have synthetic grass, this means you will need to know how to properly remove these leaves and other debris that the breeze might bring. To get rid of leaves without destroying your turf, use a push broom to broom the turf against the grain. You can also use a rake or blower.

Stabilize the Fibers

It’s recommended to stabilize the fibers of fake grass at least every three months, so a new season is definitely a great time to do this task. The good news is that if you cleaned the turf with a push broom, you accomplished two tasks with one. The push broom not only cleans the turf of leaves and debris, but also stabilizes the fibers.

Artificial Turf Supply Commercial & Residential Division provides synthetic lawns for commercial and residential projects, including artificial lawn products for pets and playgrounds.

Ideas for Refinishing a Door

Refinishing a door is one of the most satisfying and achievable projects that anyone can do. Even the most originally beautiful wood door will suffer after years of facing the elements. With pre-planning and assembly of tools you need, plan to start early and enjoy the fruits of your labor by late afternoon to early evening. Ask a friend to help in taking the door down to refinish it. Some doors are quite large and heavy! Here are some ideas for refinishing a door:

Tools

Consider your hands, eyes, and skin before starting a refinishing project. Make sure you’ve got goggles, rubber gloves, and a long-sleeved shirt and long pants to wear.

Plan to use a work bench or a couple of sawhorses to stabilize the door while you’re refinishing it.

Remove stain or old paint

Start with a light coat of remover. A two-inch bristle paint brush should work well. Wipe remover from the edge of the door as you apply it. Some removers drip. Paint removers shouldn’t be allowed to dry so, as the solution is absorbed by the wood, continue to apply more until the wood is visible. Most paint removers should perform the job in about thirty minutes. Use a scrubbing brush to remove any finish that isn’t automatically dissolved in this step.

Sand, stain, and seal the wood

Use fine grit sand paper to remove all traces of the finish. Then, use a natural stain to restore the beauty of the wood. Use a foam brush, working one section at a time. Wipe any excess with a paper towel, rubbing in the wood grain direction. If applying urethane to add shine, do this right away. The stain doesn’t need to dry first. Optionally, use stencils or appliques to give your door a custom look.

Rehang the door

The results of your handiwork are complete, so it’s best to ask your friend for assistance in rehanging the door. Then, stand back and admire your work!

 

– Source –

ETO Doors offers a 1 year manufacturer’s warranty on every door it sells. ETO Doors is dedicated to total customer satisfaction. See ETO Doors reviews for every door online at their website.

1 2 3 4 13